Wall panel manufacturing panel machine, roof panel manufacturing equipment, bridge deck sheet rolling forming machine

Main Technical Parameters

Product Introduction

The 12 Station Color Steel Tile Roll Forming Machine is built for continuous processing of color steel roofing profiles. During operation, the steel sheet passes through multiple roller stages and is gradually shaped into the required tile profile.

This configuration uses 12 roller stations, 45# steel for the rollers and shafts with quenching and plating treatment, a Φ70mm shaft diameter, and a CR12 cutting system. Power transmission is provided through a chain drive, with a production speed of 15–20m/min.

Technical Specifications

Applications

This roll forming equipment can be used for:

• Color steel roofing tile production
• Metal roofing profile manufacturing
• Roofing sheet forming
• Steel construction material processing
• Building roof panel production

Product Advantages

12-Stage Roller Forming
The 12 roller stations allow the steel sheet to be formed progressively through multiple shaping stages.

Treated 45# Steel Components
The rollers and shafts are specified as 45# steel with quenching and plating treatment.

CR12 Cutting Unit
The cutting section uses CR12 material according to the supplied machine configuration.

Chain Transmission
The machine adopts chain drive for mechanical power transmission between the relevant components.

Continuous Production Configuration
The specified operating speed of 15–20m/min is designed for continuous roofing profile forming.

Manufacturing & Quality

The machine is configured according to the confirmed technical specifications, including the roller station quantity, component material, shaft diameter, cutter material, transmission method, speed, power, and voltage.

The main specifications can be checked during machine assembly and before shipment against the confirmed production requirements.

Why Choose This Machine?

When evaluating roofing roll forming equipment, customers should consider the required roof profile, steel material, forming station configuration, production speed, cutting method, and electrical conditions.

This 12 Station Color Steel Tile Roll Forming Machine provides a defined configuration for manufacturers producing continuous metal roofing profiles.

FAQ

How many roller stations are included?
The machine is equipped with 12 roller stations.

What material is used for the rollers and shafts?
The specified material is 45# steel with quenching and plating treatment.

What is the shaft diameter?
The shaft diameter is Φ70mm.

What cutter material is specified?
The cutter material is CR12.

What is the production speed?
The specified speed is 15–20m/min.

What is the electrical specification?
The machine is specified for 380V / 50Hz / 3 Phases.