Fully Automatic Color Steel Glazed Tile Metal Color Steel Thin Roof Panel Rolling Forming Machine

Main Technical Parameters

Product Overview

The 9-Station Color Steel Tile Roll Forming Machine is designed for the continuous forming of color steel roofing tile profiles. The machine is equipped with a 9-station roller forming section, where the steel sheet is shaped gradually through a series of forming processes.

Roller Forming Configuration

The machine adopts a 9-station roller forming system. During the forming process, the steel material passes through each roller station in sequence, allowing the profile to be shaped step by step.

The number of roller stations is an important configuration parameter when selecting equipment for different color steel tile profile requirements.

Material and Shaft Structure

The rollers and shafts are manufactured from 45# steel with quenching and plating treatment.

The forming section is equipped with a Φ70 mm shaft diameter, which defines the main dimensional specification of the machine's shaft structure.

Transmission and Cutting System

The machine uses a chain drive system for power transmission.

The cutting unit is configured with a CR12 cutter. The drive method and cutter material are key technical details of the equipment configuration.

Production Speed

The specified production speed of this machine is 15–20 m/min.

This parameter provides a reference for production planning and machine comparison. The actual operating condition may vary depending on the selected profile and production requirements.

Electrical Configuration

The machine is designed with 4+4 kW total power.

The required voltage specification is 380 V / 50 Hz / 3 Phases. The power supply conditions at the installation location should be confirmed before operation.

Application Range

The 9-Station Color Steel Tile Roll Forming Machine is intended for continuous production of color steel roofing tile profiles.

Possible applications include:

• Color steel tile manufacturing
• Roofing profile forming
• Metal sheet profile production
• Roofing material processing
• Building roofing profile manufacturing

The machine configuration should be selected according to the required finished profile and production conditions.

Configuration Summary

This machine features a 9-station forming section, 45# steel rollers and shafts with quenching and plating treatment, and a Φ70 mm shaft diameter.

The equipment is also configured with a CR12 cutter, chain drive system, 15–20 m/min production speed, 4+4 kW total power, and 380 V / 50 Hz / 3-Phase electrical supply.

These specifications provide a technical reference for buyers evaluating a 9-Station Color Steel Tile Roll Forming Machine for color steel roofing profile production.