|
Product Details:
|
| Approval: | ISO | Suitable Material: | HRB60 Or Equivalent |
|---|---|---|---|
| Material Thickness: | 0.2-0.6mm | Roller: | High Grade 45# Steel |
| High Light: | sheet metal rolling equipment,roof sheet making machine |
||
Main Technicial Parameter:
| 1 | Inner diameter of manual decoiler | 480-510mm |
| 2 | Outer diameter of manual decoiler | 175mm |
| 3 | Weight capacity of manual decoiler | 2T |
| 4 | Appearance Size | 5800mm*1350mm*1510mm |
| 5 | Raw Material | colored steel or galvanized steel |
| 6 | Roller material | high grade 45# forged steel,polished,heated,quenched |
| 7 | Blade Material | CR12 with polished,heated and quenched HRC60-62 |
| 8 | Chrome Coating | coated with 0.05mm hard chrome |
| 9 | Control System | PLC control |
| 10 | Main Motor Power | 5.5 KW |
| 11 | Hydraulic Power | 3 KW |
| 12 | Roller station | 14- rollers(as final profile drawing) |
| 13 | Material of chain | high grade 45# steel:polished,heated,quenched HRC 45-50 |
| 14 | Speed of Product | 3-4m/min |
| 15 | Thickness range | 0.3-0.8mm |
| 16 | Type of cutting | hydraulic cutting |
| 17 | Coil Width | max1250mm,or as your requirement |
| 18 | Cover Width | as your requirement |
| 19 | Material of rack | complete welded structure of A3 steel plate |
| 20 | Machine frame stand | welded with 36# I-steel |
| 21 | Type of forming machine | single station with chain transmission |
| 22 | Thickness of frame | 18mm |
| 23 | Shaft Diameter | 70mm |
| 24 | Weight | about 4T |
| 25 | Voltage | 380V 50HZ 3Phases( or as your local requirement) |
| 26 | Electrical control | PLC frequency control system with touch screen in Engli |
Welcome to review our roll forming machine
complete service
Experienced engineers
Man-made uncoiler-Roll forming machine-compture control system-hydraulic control system-form cutter
IntroducationMachine consist of uncoiler and its base, coil sheet guiding equipment, film covering device, roll forming system, post cutting equipment, hydraulic station, controlling system, supporter table.
Q: Can you make the machine according to my design or prototype?
A: Yes. We have an experienced team for working out the most suitable design and production plan for
the machine that you are going to book with us
Q: What do you need to know so that I can have a machine plan from you for our technical people reference?
A: Well, as the basic needed information for designing a machine plan, pls see below details For the slitting
line and cut-to-length: the material type(HR, CR, HDGI, PPGI, SS), thickness and width range, coil weight, cutting speed, slitting numbers(only for slitting line), steel plate required cutting length(only for cut-to-length line) For the C,Z,W Profile and roof/wall panel roll forming machine: the material thickness range,
width range and the profile drawing are required(how many roll forming stands required are depended on the profile drawing) For the HVAC machine and
the stainless steel pipe machine: the wall thickness range and the diameter range of the pipe Pls also provide
us with your special requirements for the machine, for example, you want the machine to be a full-automatic one or semi-automatic one in order to save your project.
Contact Person: Jing
Tel: +86 188 2511 7789
Fax: +86-317-5666689
