|
Product Details:
|
| Material Type: | PPGI/GI | Material Thickness: | 0.3-0.6mm |
|---|---|---|---|
| Material Width: | 900mm | Roller Stations: | 10/11 Stations |
| Roller & Shaft Material: | 45# Steel Quenching And Plating | Diameter Of Shaft: | Φ70mm |
| Cutter Material: | CR12 | Drive Type: | Chain Drive |
| Speed: | 15m/min | Total Power: | 5.5+5.5KW |
| Voltage: | 380v 50Hz 3phases | ||
| Highlight: | Roof Roll Forming Machine,Double Layer Roll Forming Machine |
||
Product Description
The double-layer tile pressing machine can produce two different specifications of tiles at the same time with its efficient production capacity, greatly shortening the production cycle and meeting the needs of rapid construction of industrial plants. Moreover, the tiles it produces are of reliable quality, with high dimensional accuracy after precise molding process, which can provide stable and durable roof covering for industrial plants and adapt to various climate and mechanical stresses that may be faced in industrial environments.
Main Technical Parameters
| Material | Type | PPGI/GI |
| Thickness | 0.3-0.6mm | |
| Width | 900mm | |
| Roller Stations | 10/11Stations | |
| Roller & Shaft Material | 45# Steel Quenching and Plating | |
| Diameter of Shaft | Φ70mm | |
| Cutter Material | CR12 | |
| Drive Type | Chain Drive | |
| Speed | 15m/min | |
| Total Power | 5.5+5.5KW | |
| Voltage | 380V 50Hz 3Phases | |
Working Flow
Decoiling → Material Feeding → Roll Forming → Cutting → Collecting
Component & Technical Parameters
This part is used to support Coil.
And make the coil in a rotary way.
Bearing capacity: 5T
Inner diameter: 470-530mm
Uncoilers play an indispensable role in the production process of tile presses. In the production process of tile presses, metal sheets are usually supplied in the form of coils, and the primary function of the uncoiler is to smoothly and steadily unwind these tightly wound metal sheets.
Hydraulic Pump Station
When the equipment encounters abnormal resistance or excessive pressure, it can automatically adjust the pressure of the hydraulic system to avoid damage to the equipment due to overload, thereby improving the reliability and stability of the floor deck forming machine.
Touch Screen Control Cabinet
The control cabinet has two modes, automatic and manual modes.
The unit length of the targeted sheet and quantity can be set in the touchscreen.
The system is simple and easy to operate.
Feeding Table & Pre-Cutter
The surface of the feed table is usually made of smooth, wear-resistant materials or coatings that will not scratch the board, to avoid scratches, abrasions and other damage to the board surface during the board conveying and loading process.
Shaft & Roller
During the tile pressing process, the contact between the wheel and the plate can play a certain buffering role, reducing the impact force of the tile press on the plate at the moment of pressing, avoiding damage to the plate due to excessive force, and also reducing the vibration and noise of the equipment, protecting other parts of the equipment.
Pressing Section & Cutter
After the continuous sheet is pressed and formed, it is divided into individual tile units to facilitate subsequent transportation, stacking and installation.
It can produce two layers of trapezoidal corrugated boards at the same time and form them in one step, which greatly improves production efficiency and saves production time and labor costs. Compared with the traditional method of producing single-layer corrugated boards and then stacking them, it reduces the intermediate links and makes the production process more concise and efficient.
Contact Person: Miss. Jing
Tel: +86 188 2511 7789
Fax: +86-317-5666689
