|
Product Details:
|
| Material Type: | PPGI/GI | Material Thickness: | 0.3-0.6mm |
|---|---|---|---|
| Material Width: | 400mm | Roller Stations: | 16Stations |
| Roller & Shaft Material: | 45# Steel Quenching And Plating | Diameter Of Shaft: | Φ70mm |
| Cutter Material: | CR12 | Drive Type: | Chain Drive |
| Speed: | 15m/min | Total Power: | 5.5+5.5KW |
| Voltage: | 380v 50Hz 3phases | ||
| Highlight: | Long Span Roof Roll Forming Machine,PPGI Long Span Roofing Machines,GI Long Span Roofing Machines |
||
Product Description
During the sheet forming process, the length of the trapezoidal tile needs to be precisely controlled. Usually, the double-layer trapezoidal tile press adopts a length measuring device to achieve this function. Common length measuring devices include encoders, roller counters, etc. The encoder is connected to the transmission system and can accurately measure the conveying length of the sheet. When the sheet is conveyed to the set length, the encoder will send a signal to the control system. The roller counter measures the length of the sheet by contacting the surface of the sheet and rotating as the sheet moves, and by counting the number of revolutions of the roller.
Main Technical Parameters
| Material | Type | PPGI/GI |
| Thickness | 0.3-0.6mm | |
| Width | 400mm | |
| Roller Stations | 16Stations | |
| Roller & Shaft Material | 45# Steel Quenching and Plating | |
| Diameter of Shaft | Φ70mm | |
| Cutter Material | CR12 | |
| Drive Type | Chain Drive | |
| Speed | 15m/min | |
| Total Power | 5.5+5.5KW | |
| Voltage | 380V 50Hz 3Phases | |
Working Flow
Decoiling → Material Feeding → Roll Forming → Cutting → Collecting
Component & Technical Parameters
This part is used to support Coil.
And make the coil in a rotary way.
Bearing capacity: 5T
Inner diameter: 470-530mm
(adjustable according to demand.)
In order to avoid damage to the machine by impact when the machine is running, we have installed a brake device for you.
Hydraulic Pump Station
The purpose of this pump station is to drive the cutter to start cutting works.
The hydraulic tank use 46# hydraulic oil.
Equipped with a cooling fan which can internal circulation cooling, to ensure the oil pump station will not be affected by high oil temperature during working.
Solenoid valve brand: Huade
Touch Screen Control Cabinet
The control cabinet has two modes, automatic and manual modes.
The unit length of the targeted sheet and quantity can be set in the touchscreen.
The system is simple and easy to operate.
Electrical Component Brand:
1. VFD: Delta
2. Circuit breaker: Delixi
3. Contactor: Delixi
4. Relay: Xinling
5. PLC: Delta
6. Transformer: Delixi
Feeding Table & Pre-Cutter
Guide the coil come into the correct position and going to the roll forming part.
Also including a Hand Pull Cutting Device, it is convenient to pre-cut the coil when want to changing color or thickness.
Shaft & Roller
Material is 45# Steel Quenching and Plating.
The processed rollers are smooth, hard and will not rust.
Will not leave any scratches on the sheet when working.
Pressing Section & Cutter
The material of blade is CR12.
With high strength, better hardenability and good wear resistance.
Based on preset programs and logic, the control system can realize the automatic operation of the tile press. The entire process from sheet conveying, forming to shearing can be completed automatically under the precise control of the control system without frequent manual intervention. This not only improves production efficiency, but also reduces the impact of human factors on product quality, ensuring product consistency and stability. At the same time, some advanced control systems also have a fault self-diagnosis function, which can automatically detect the fault point of the equipment and provide corresponding solutions, so that maintenance personnel can quickly repair and shorten the downtime of the equipment.
Contact Person: Miss. Jing
Tel: +86 188 2511 7789
Fax: +86-317-5666689
