|
Product Details:
|
| Usage: | Stud And Track | Type: | Cold Roll Forming Machine |
|---|---|---|---|
| Thickness: | 0.6mm | Capacity: | 20-45m/min |
| Power: | 4.5+5+2.3kw | Thickness Of The Plate: | 0.3-0.6mm |
| High Light: | 0.6mm light gauge steel roll forming machine,delta light gauge steel roll forming machine,fly shear light gauge steel machine |
||
| 1. The Product Description of cee purlins |
(1). Brief Introduction
The purlin made by C Purlin Roof Steel Profile Roll Forming Machine is widely used in the main body stress
structure of the large and medium-size construction, such as the plant, the warehouse, locomotive shed,
hangar, exhibition building. it is known as economic and high efficient building material.
The steel C purlin has following features:
a. Light weight, low cost;
b. Easy to operate: the purlin can be formed and punched according to your actural need;
and it can be installed directly.
(2). Working Flow of Roll Forming Machine
Coil decoiling-Coil feeding-Leveling-Roll forming-Punching(optional)-Length measuring-Sheet
cutting-Sheet surpporting
(3).Technical Detail
A. General
| Suitable Material | Hot rolled strip steel, Q235 or equivalent |
| Material Thickness | 0.6 mm |
| Material Width | 100mm |
| Dimension | About 4.0*1.2*1.75m(L*W*H) , as per the drawing |
| Working Space | About 10.0*2.7m(L*W) |
|
Length of the Sheet |
You can set the length according to your need. It is controlled by PLC which can ensure the accuracy of ±1mm. |
| Cutting |
Automatically stop and cutting when it comes to the set length. |
B. Components Details
| Roller Material | High grade 45# steel. Hard chrome plating, 0.05mm. |
| Main Frame | 400# steel. More stable and no shaking. |
| Middle Plate |
16mm. We use thicker plates to ensure stability of our products. |
| Forming Steps | 11-16, according to the drawing. |
| Shaft Material | Φ70 mm, high grade 45# steel. |
|
Treating process: tempering- finish turning, high rigidity, hard to deform. |
|
|
Cutting Blade Material |
Cr12, hardness HRC60-62. |
| Treating process: heat treatment- plane abrasion- wire electrode cutting. |
C. Electric Components
| Suitable Power | 380V, 50 Hz, 3 phase or according to your need. |
| Screen | 7 inch touch screen, easy to operate. |
| PLC | Delta DVP14ES |
|
Well-adapted to various conditions, such as moisture, electromagnetic disturbance. |
|
| Frequency Converter |
Delta VFD-M. It has the advantage of slowing down before cutting, to ensure the length accuracy (±1mm, far better than industrial standard ±3mm). |
|
Length Measurement Device |
Omron, made in Japan. |
| It features with high accuracy and stability. |
| FAQ |
1. Can you make the machine according to my design or photo type?
A: Yes. We have an experienced team to work out the most suitable design and production plan
for the machine.
2: How can we be assured that you will deliver us quality machine with spare parts?
A:1. Customers to send the technical people to our factory for checking the quality.
2.We can send the technicians to the buyer`s factory for the installation of the machine.
3.What policy of your garentee?
A: Within the One-YEARS period, we could supply you the replacement parts free of charge
for any damaged parts caused by quality problems after two years,you need to buy by factory cost.
Contact Person: Jing
Tel: +86 188 2511 7789 / +86 182 3376 6102
Fax: +86-317-5666689
