Automatic Shutter Door Blade Roll Forming Machine Garage Door Rolling Up Door Making Machine

Product Description

The working principle of the rolling door forming machine is based on the plastic deformation of metal. The pre-cut metal sheet (usually cold-rolled steel sheet or galvanized steel sheet) is placed on the feeding device, and then the sheet is conveyed to the roller system through the feeding device. The rollers in the roller system continuously bend, curl and other deformation operations on the sheet in a certain order and shape. Under the extrusion and guidance of the rollers, the sheet gradually forms a specific shape of the rolling door panel, such as wavy, trapezoidal, etc. When the panel reaches the set length, the cutting device will cut it off to complete the forming process of a panel.

 Working Flow

Decoiling → Material Feeding → Roll Forming → Cutting → Collecting

 Main Technical Parameters

Component & Technical Parameters

Decoiler

This part is used to support Coil.

And make the coil in a rotary way.

Bearing capacity: 3T

Inner diameter: 470-530mm

(adjustable according to demand)

Shaft & Roller

Material is 45# Steel Quenching and Plating.

The processed rollers are smooth, hard and will not rust.

Will not leave any scratches on the sheet when working.

Hydraulic Pump Station

The purpose of this pump station is to drive the cutter to start cutting works.

The hydraulic tank use 46# hydraulic oil.

Equipped with a cooling fan which can internal circulation cooling, to ensure the oil pump station will not be affected by high oil temperature during working.

Control Cabinet

The control cabinet has two modes, automatic and manual modes.

The unit length of the targeted sheet and quantity can be set in the touchscreen.

The system is simple and easy to operate.

Cutter

The material of blade is CR12.

With high strength, better hardenability and good wear resistance.

Output Table

This part is used to collect the formed products.

The bracket is equipped with rollers to facilitate the product forwarding without being scratched.

Rolling door forming machines have a high production speed and can continuously produce rolling door panels. Compared with traditional manual or semi-mechanized production methods, it can greatly improve production efficiency. For example, a well-performing forming machine can produce dozens or even hundreds of rolling door panels per hour, which can meet the needs of large-scale production.

Through precise roller design and advanced control systems, the forming machine can produce rolling door panels with high dimensional accuracy and regular shapes. The thickness, width, length and wave shape of the door panels can be precisely controlled within a very small tolerance range, which is very important for ensuring the installation and use quality of the rolling door. For example, the length tolerance of the door panel can be controlled within ±1mm, and the height and spacing errors of the wave shape can also be controlled within a very small range.